Инструкция по эксплуатации к двигателю 4G64 S4M (english)

Engine Type

4G64 S4 MP I M/T

Form

4 lengths of stroke, 4 air cylinder, water cooling, series, single overhead camshaft, gasoline engine

Output Volume (cm3)

2351

Cylinder DiameterX Course(mm)

86.5X100

Firebox Shape

Single Slope Roof Type

Cylinder Liner Form

N Cylinder Liner

Distance between Cylinder (mm)

93

Height of Cylinder Body (mm)

235

Central Distance of Connecting Rod

150

Number of Arrangement of Valves

Single Overhead Camshaft, 4 Valves

Compression Ratio

9.5

Fuel Supply Mode

Multi Point injection (MPI)

Rotating Direction of the Crankshaft

Clockwise (from the front end of the engine)

Piling Order

1-3-4-2

Lubricating Form

Pressure and Splash Combined Type

Packed Weight of Machine Oil (Including 0.3 L Machine Oil Cleaner)

4.3 L

Cooling Mode

Completed Circuit Enforced-type Water Cooling

Engine Weight (kg)

167

Number Position of the Engine

From the Front End of the Engine, the Number of the Engine at the Left Side of the Cylinder

Discharging

EURO-2

Engine Type

4G64 S4 MP I М/T

The Largest Net Power ( kw /rpm) { (PS/rpm) }

91/5250 {122/5250}

The Largest Torque (N. m/rpm) {(kgf. M/rpm)}

200/2500 {20.4/2500}

The Ratio of Fuel Consumption g/kW  h(g/Ps  h)

4. 4kW/2000rpm (6Ps/2000rpm)

571.0 (420)

29.4kW/4000rpm (40Ps/4000rpm)

353.5 (260)

Engine Type

4G64 S4 MP I M/T

Fuel Trademark

>93 Number Unleaded Gasoline (Lead Content< 0.013 g/L)

Idling Speed (rpm)

750 + 30

Rated Speed (rpm)

5250

Opening Temperature of Thermostat (C)

82 (when fully opened 95)

Cooling Fluid

High Quality Glycol Cooling Fluid

Machine Oil

For Filling when going out the Factory: SJ 10W-30+FM

(Friction Conditioning Agent)

The General Market Uses API Sort SE Level or Higher Level

(SAE 10W-20) Frigid Zone: SE Level or Higher Level

Under the Condition of -40°C~-10°C, Stickiness of Machine Oil

as SAE 5 W-20;

Under the Condition of -40°C~-10°C, Stickiness of Machine Oil

as SAE 5 W-30;

Under the Condition of -40°C~-20°C, Stickiness of Machine Oil

as SAE 5 W-40;

Valve Clearance

Using Hydraulic Lifter, the Valve Clearance 0

Cooling Mode

Completed Circuit Enforced Cooling

Clearance between Ignition Plug (mm)

1-1.1

Deflection of Driving Belt (under the Effect of 98 N Force) mm Alternating Current Generator Check Value Modulation Value New Belt Old Belt Power Steering Pump Check Value Modulation Value New Belt Old Belt Air Conditioner Compressor Check Value Modulation Value New Beit Old Belt

7.0-9.0 mm

5.5-7.5 mm 7.5-8.5 mm

5.5-7.5 mm

4.0-6.0 mm 6.0-7.0 mm

7.0-9.5 mm

6.0-7.0 mm 8.0-9.0 mm

Protruding Amount of Automatic Tightener

3.8-4.5 mm